• Digitus Passive PoE Cable Kit

    Digitus Passive PoE Cable Kit

    10.56

    *1x Incoming cable, featuring RJ45 plug, DC jack and RJ45 jack
    *1x Outgoing cable for the device, featuring RJ45 plug, DC plug and RJ45 jack
    *Suitable for 5.5mm DC plugs
    *Connection speed: 10/100 Mbit/s
    *PVC coating
    *RJ45 plug
    *Assignment: 1/2/3/6 for data transfer, 4/5/7/8 for power supply


    SKU: 260240
  • Power over Ethernet (PoE) Injector 1 Port, 48 V DC, IEEE 802.3af Compliant

    Power over Ethernet (PoE) Injector 1 Port, 48 V DC...

    36.47

    Reduce costs by using existing Cat5 cable to provide both power and data.

    The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

    Reduce Wiring Costs
    No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Preserve Existing Investments
    Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.

    Protect Your Equipment
    Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).


    SKU: 524179
  • High-Power Ceiling Mount Wireless 300N PoE Access Point

    High-Power Ceiling Mount Wireless 300N PoE Access ...

    93.49

    Features:
    • Up to 300 Mbps network link speed
    • Super long-range indoor Wireless N range extender and universal repeater
    • Smoke detector design
    • Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b standards
    • 2T2R MIMO technology for enhanced throughput and coverage
    • Supports WMM function to meet the multimedia data bandwidth requirement
    • Supports Wi-Fi Protected Setup (WPS)
    • Supports WEP and WPA/WPA2 (TKIP and AES) data encryption
    • IEEE 802.3af-compliant PoE-powered device with one PoE (PD) port
    • DHCP server assigns IP addresses for all LAN users
    • Supported modes: Access Point, Bridge Point-to-Point, Bridge Point-to-Multi-Point, WDS and Universal Repeater
    • Supports multiple ESSIDs with individual security settings
    • Multiple ESSIDs support VLAN tagging
    • Easy installation through Web-based user interface
    • Firmware upgradeable
    • Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best compatibility and performance
    • Three-Year Warranty


    SKU: 525251
  • 8-Port Rackmount PoE Midspan 15.4 Watts, Class 3 IEEE 802.3af compliant, 19″ Rackmount

    8-Port Rackmount PoE Midspan 15.4 Watts, Class 3 I...

    247.11

    Deliver Power over Ethernet to remote devices.

    The INTELLINET NETWORK SOLUTIONS PoE Midspan converts standard 110-240 VAC power into low-voltage DC that runs over existing LAN cabling (Cat5 or better) to power up 802.3af compliant network equipment. This PoE Midspan features eight integrated 802.3af Power over Ethernet (PoE) ports capable of supplying up 15.4 Watts of power per port. By adding this PoE Midspan to existing network LANs, installing networking products such as IP phones, wireless access points and network cameras becomes much easier.

    Convenient Installation
    The PoE Midspan is rackmountable, so adding it to a 19-inch network rack or cabinet is a straightforward process. Once placed in a rack, delivering power and data to the other 802.3af-compliant networking devices simply becomes a Plug and Play solution, using standard Cat5 or better Ethernet cables. Installation of network equipment is no longer confined to locations with available power outlets, and bulky AC power adapters are not required.

    Optimum Performance
    To take full advantage of the PoE Midspan, install several of them to provide a central power source to the entire network LAN infrastructure. Connect the PoE Midspans to an uninterruptible power supply (UPS)* for guaranteed power in case of unforeseen emergencies. This ensures continuous operation during power failures and also eliminates the time and cost of installing separate power cabling and providing a dedicated UPS for individual terminals and networking devices.

    Investment Protection
    No need to replace existing network LAN switches in order to deploy Power over Ethernet compliant products. Simply install the PoE Midspan between your existing LAN switches and the new 802.3af-compliant Power over Ethernet products, and you can enjoy the benefits of PoE while preserving the investment you’ve made on your existing networking equipment.


    SKU: 502931
  • Wireless 300N Outdoor PoE Access Point – **LEAD TIME APPROX 1 WEEK**

    Wireless 300N Outdoor PoE Access Point – **L...

    323.64
    • Up to 300 Mbps network link speed
    • Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b standards
    • Industrial-grade IP 67 housing for optimal protection against dust and water
    • Withstands wind speeds of up to 120 km/h (75 mph)
    • 2T2R MIMO technology for enhanced throughput and coverage
    • Supports WMM function to meet the multimedia data bandwidth requirement
    • Supports Wi-Fi Protected Setup (WPS)
    • Supports WEP and WPA/WPA2 (TKIP and AES) data encryption
    • IEEE 802.3af-compliant PoE-powered device with one PoE (PD) port
    • Integrated RADIUS authentication server for 16 wireless clients
    • DHCP server assigns IP addresses for all LAN users
    • Supported modes: Access Point, Bridge Point-to-Point, Bridge Point-to-Multi-Point, WDS and Universal Repeater
    • Supports multiple ESSIDs with individual security settings
    • Multiple ESSIDs support VLAN tagging
    • Easy installation through Web-based user interface
    • Firmware upgradeable
    • Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best compatibility and performance
    • Three-Year Warranty

    SKU: 524711